(1.27 mm) .050" tfsd, tfsdt series for complete specifcations see www.samtec.com? tfsd or www.samtec.com?tfsdt insulator material: black lcp contact material: becu plating: au over 50 " (1.27 m) ni operating temp range: -10 c to +80 c (pvc) -40 c to +125 c (*tefon ? ) wire: 28 or 30 awg rohs compliant: ye s mates with: sfm, sfc (Ctr requires tfmCwt option), sfml (Cxl end option required) (1.27) .050 (6.10) .240 no . of p ositions x (1.27) .050 + (2.54) .100 assemb led length (3.18) .125 end 2 notch (nds) end 1 notch (alw a ys do wn) end 1 notch (alw a ys do wn) end 2 notch (nus) end 2 notch (ndx) end 2 notch (nux) (6.05) .238 (14.26) .562 Cnds or Cnus Cndx or Cnux specifications positions per row wire gauge plating option assembled length end 2 option C30 = 30 awg C28 = 28 awg Cg = 10 " (0.25 m) gold on contact Cxx.xx = assembled length in inches (76.20 mm) 03.00" min. for Cs end option (82.60 mm) 03.25" min. for Cd, Ct, Ctf, & Ctr end option requires Cd, Ctf or Ctr (end 1 notch down). Cnus = notch up, straight Cnds = notch down, straight Cnux = notch up, crossed Cndx = notch down, crossed end option Cs = single ended Cd = double ended Ct = transfer end terminal on end 1 socket on end 2 Ctf = transfer end with friction lock (C05 & C07 positions not available.) Ctr = transfer end with retention latch (tfm Cwt option required for mating) type strip tfsd = double row pvc cable tfsdt = double row *tefon ? cable notes: for wiring option and pin position location information, refer to drawings on web. tefon ? cable is intended for crimp only. contact samtec for solderable cable applications. some lengths, styles and options are non-standard, non-returnable. tiger eye ? discrete cable assembly *dupont ? teflon ? is a registered trademark of the e.i. du pont de nemours and company or its affiliates. C03, C04, C05, C07, C10, C15, C20, C25, C40, C50 (standard sizes) for complete scope of recognitions see www.samtec.com/quality recognitions also available (moq required) ? color coded cable (*tefon ? n/a) ? other plating options contact samtec. option pin configuration t-nus pin 1 to pin n t-nds pin 1 to pin 1 t-nux pin 1 and pin n-1 t-ndx pin 1 to pin 2 d-nus pin 1 to pin 2 d-nds pin 1 and pin n-1 d-nux pin 1 and pin 1 d-ndx pin 1 to pin n f-217 supplement (rev 28feb17) file no. e111594 tfsdC15C30CgC05.00CdCnux tfsdtC05C30CgC05.00CdCnus 28 or 30 awg single or double ended (1.27 mm) .050" pitch www.samtec.com due to technical progress, all designs, specifcations and components are subject to change without notice. all parts within this catalog are built to samtecs specifcations. customer specifc requirements must be approved by samtec and identifed in a samtec customer-specifc drawing to apply.
|
